AUS/NZ
PC PS XBOX GIRL TV STORE
Login:
? Sign Up!
Powered by AMD
E-Sports Communities & Competitions

Setting your NAT Type to open.

Started by DON MEGAAA on 5:20pm 14/11/11. 1,537 views and 11 posts, 0 users reading, last post by NECR0 PED 0.

Currently reading (0 users):
OP
Joined: 26/1/08
Posts: 1,208
Defaults: AU - PC: Black Ops
using Safari 533.1
Rep:
58%
Okay so few things about this you need to know how to access your modem / router because we are going to mess about in there. Some of you did this for MW2 / AOE3 or whatever.

If you visit http://www.infinityward.com/nat.php which is where the game sends you, it will tell you to set UPnP to on or yes. Which is helpful and will also tell you to allow anonymous NAT redirection, however most routers won't have this option or you just plain cannot find it.

So we visit the geniuses at:
www.portforward.com
Not only will they show you how to login to your router if you haven't the slightest idea, but actually tell you which ports need forwarding (unlike infinity ward which tells us to visit our router manufacturer and pester them). For those who know how to port forward already we are forwarding:

3074 - 3074 TCP/UDP
27000 - 27050 TCP/UDP

You should also note that some modems and routers simply don't forward ports unless you enter the commands in the command line, and others just don't do it at all.

Good luck
Posted on Monday, 14th November 2011
Joined: 7/6/10
Posts: 129
Defaults: AU - PC: Call of Duty: MW3
using Chrome 19.0
Rep:
34%
Guide to obtain OPEN NAT in PS3 Black Ops with Thomson TG782T Modem

Step 1- On your PC go to start click on run copy and paste this command. telnet 192.168.1.254 (press enter)

This will open a telnet session with your modem, you will then be asked for a Username and Password.

Username: admin (press enter)
Password: your modems password (usually blank by default) (press enter)

Step 2- copy and paste these 4 command lines one at a time pressing enter after each one is done.

:connection bind application=CONE(UDP) port=3074-3075

:connection bind application=CONE(UDP) port=3478-3479

:connection bind application=CONE(UDP) port=3658

:saveall

then close the telnet session

Step 3- Reboot your modem (just power off and back on) not always needed but is helpful to do after changes made.

Step 4- Open Call Of Duty Black Ops on PS3, go to multiplayer and enjoy your OPEN NAT gaming from now on =)

^^ works for pc mw3 if your on bigpond and youve portforwarded the ports and still doesnt work
Posted on Monday, 14th November 2011
Joined: 23/3/09
Posts: 972
Defaults: AU - XBOX360: Call of Duty
using Chrome 19.0
Rep:
76%
Xbox Referee
for xbox with those port forwarding things. the ip address it asks for is it the internal IP that is listed on that site or do you put in your own ip?
Posted on Monday, 14th November 2011
Joined: 4/12/07
Posts: 1,011
Defaults: AU - PC: Dota 2
using Firefox 13.0
Rep:
39%
I need it on OPEN for pc mw3.... and upnp is on and the port forward site just gives u some crappy download program that costs so any idea
Posted on Monday, 14th November 2011
Joined: 20/4/10
Posts: 36
Defaults: AU - PC: Black Ops
using Internet Explorer 9.0
Rep:
51%
For ppl who running Win7 u will need to turn on telnet.

To do this go to start > control panel > programs > turn Windows features on or off

Chech telnet client and click ok. then u can use telnet.

Posted on Monday, 14th November 2011
Joined: 4/12/07
Posts: 1,011
Defaults: AU - PC: Dota 2
using Firefox 13.0
Rep:
39%
Quote from tsparkz on the 14th of November 2011:
Guide to obtain OPEN NAT in PS3 Black Ops with Thomson TG782T Modem

Step 1- On your PC go to start click on run copy and paste this command. telnet 192.168.1.254 (press enter)

This will open a telnet session with your modem, you will then be asked for a Username and Password.

Username: admin (press enter)
Password: your modems password (usually blank by default) (press enter)

Step 2- copy and paste these 4 command lines one at a time pressing enter after each one is done.

:connection bind application=CONE(UDP) port=3074-3075

:connection bind application=CONE(UDP) port=3478-3479

:connection bind application=CONE(UDP) port=3658

:saveall

then close the telnet session

Step 3- Reboot your modem (just power off and back on) not always needed but is helpful to do after changes made.

Step 4- Open Call Of Duty Black Ops on PS3, go to multiplayer and enjoy your OPEN NAT gaming from now on =)

^^ works for pc mw3 if your on bigpond and youve portforwarded the ports and still doesnt work
yeah my pc mw3 is now now open
Posted on Monday, 14th November 2011
OP
Joined: 26/1/08
Posts: 1,208
Defaults: AU - PC: Black Ops
using Safari 533.1
Rep:
58%
Quote from SounDWav3 on the 14th of November 2011:
for xbox with those port forwarding things. the ip address it asks for is it the internal IP that is listed on that site or do you put in your own ip?

Ahhhh you need your internal ip address. To find it go to start > run type cmd.exe and then type "ipconfig /all". The address your looking for is 192.168.1.* (*is a number between 2 and 254).

Quote from Bleach on the 14th of November 2011:
I need it on OPEN for pc mw3.... and upnp is on and the port forward site just gives u some crappy download program that costs so any idea

Lol thats an ad, skip it on the top right hand corner...
Posted on Monday, 14th November 2011
Joined: 23/3/09
Posts: 972
Defaults: AU - XBOX360: Call of Duty
using Chrome 19.0
Rep:
76%
Xbox Referee
Quote from DON MEGAAA on the 14th of November 2011:
Quote from SounDWav3 on the 14th of November 2011:
for xbox with those port forwarding things. the ip address it asks for is it the internal IP that is listed on that site or do you put in your own ip?

Ahhhh you need your internal ip address. To find it go to start > run type cmd.exe and then type "ipconfig /all". The address your looking for is 192.168.1.* (*is a number between 2 and 254).

Thank bro.
Posted on Monday, 14th November 2011
Joined: 23/3/09
Posts: 478
Defaults: AU - PC: Call of Duty: MW3
using Firefox 12.0
Rep:
53%
ShoutCaster
hey i have this same problem but because i dont use a router i use a switch so it isnt on the list i got a NETGEAR 5 port FS605 i have googled the shit out of different sentences because im just that ******ed i wouldnt know where to start looking hahaha what do i do?
Posted on Friday, 16th December 2011
Joined: 23/3/09
Posts: 478
Defaults: AU - PC: Call of Duty: MW3
using Firefox 12.0
Rep:
53%
ShoutCaster




hope this is clear enough what dpo i add where then what do i do

Edited once, 16/12/11 - 9:45am.
Posted on Friday, 16th December 2011
Joined: 23/3/09
Posts: 478
Defaults: AU - PC: Call of Duty: MW3
using Firefox 12.0
Rep:
53%
ShoutCaster
Quote from NECR0 PED 0 on the 16th of December 2011:
hope this is clear enough what dpo i add where then what do i do

Grammar is important! Its the difference between helping your Uncle Jack off a horse and helping your Uncle jack off a horse.
Posted on Friday, 16th December 2011
 

Setting your NAT Type to open.